Reinforced concrete tunnel lining system - uses special blocks with sloping edges to conform with bends in tunnel
DE2724034A1
METHOD OF CREATING UNDERGROUND CAVITIES
DE2704033A1
Staged multi-span reinforced concrete bridge erection - using supports carried through roadway edge cut=outs and fixed to pier
DE2656933A1
Hydraulically pressurised tunnel lining - is circular resilient element with pressure applied at sides enabling top to resist roof pressure
DE2637996A1
Compound tunnel lining for use in mountain tunnels - includes layers of porous injection moulded elastomeric plastic, matted fibre, silt and water resistant layer
DE2623179A1
Underground chambers with domed ceilings - are made by excavating under domed ceiling in open trench
DE2620376A1
Freely forwarded sectioned multi course reinforced concrete bridge - has loads indirectly lowered on completed superstructure and directly on next pier
DE2616631A1
Combined metal and concrete tunnel lining - has archways and intermediate reinforcing rods between mats embedded in lining layer
DE2524906A1
Noise protection wall with noise absorbing layers - has primary and secondary noise absorbing layers on concrete plate
DE2518138A1
Composite outdoor noise-screening wall - is made of sound-deadening reinforced concrete and plastic-bonded web-reinforced porous elastomer panels
DE2443276A1
Circular section tunnel supports - fore poled bars along abutment lines form part of permanent arch work
DE2350457A1
Permanent building trench securement - with concrete bays cast in situ between reinforced prefabricated concrete beams
DE2347794A1
Rail-level-correctable sleeper tie-plates - have play allowed in cut outs holding fitting-pieces with offset centre-line holes
DE2339884A1
Prefabricated component reinforced-concrete high-diving-board - with beams under jump-off panels and uprights statically forming storey-frame together
DE2327266A1
Rapidly assembled prefabricated building elements - with dimensions of elements of defined relationship to matrix spacing
DE2320366A1
PROCESS FOR SECURING THE OUTBREAK AND LIMITING MOUNTAIN DEFORMATIONS IN THE MOUNTAIN MANNICAL PRODUCTION OF TUBE-SHAPED CAVES
DE2261993A1
LINING OF AN UNDERGROUND CAVITY
DE2259088A1
PROCEDURE AND ARRANGEMENT FOR CONNECTING PREFABRICATED CEILING PANELS TO BASE
DE2254947A1
PROCESS FOR THE MILLNICHE PRODUCTION OF SEVERAL CAVITY