|
DE19902342A1
|
|
Conveyer chain lubrication mechanism is independent of chain speed and needs no special set-up skills or electronic controls
|
|
DE19816363A1
|
|
Pneumatic pickup frame for industrial robot handling pressed components
|
|
DE19812758A1
|
|
Sheet cleaning unit for corrosion protection oil and dirt removal especially from sheets to be pressed to form bodywork parts
|
|
DE19722240A1
|
|
Device for changing suction spiders on presses
|
|
DE3215272A1
|
|
Motor vehicle with electrical auxiliary drive
|
|
DE3120867A1
|
|
Extendable front cantilever for hydraulic self-advancing support assemblies
|
|
DE3014968A1
|
|
Protective trough for movable mine support - has diagonal rod of moving carrier hinged at sides to balance travel at each side
|
|
DE2921926A1
|
|
Mine working area striding supports remote control - involves dual pressure valves conveying reversal impulse when two pressures are equal
|
|
DE2711119A1
|
|
Suspended conveying or protection pipe position control - uses inherent righting capability to suit support advances, with guides and linkages
|
|
DE2627724A1
|
|
Powered mine support with linkage - has scissor linkage rods hinged to floor bar and rear end joint sliding on these at second ends
|
|
DE2618346A1
|
|
Mine shield support system guide - has rocker hinged to adjoining shields with coupler piston to stabilise
|
|
DE2616204A1
|
|
Mine roof supports mounted on floor member - has strut on roof member connected to strut on arm of second roof member
|
|
DE2601001A1
|
|
Mine roof support for inclined seams - has pivoting guide attached to similar guide equipment of adjoining support unit
|
|
DE2507263A1
|
|
Shield support for mines - has equipment for elastically stabilising cap to floor base
|
|
DE2455789A1
|
|
Shield support for mines - has sliding roof cap mounted on support attached to caving shield
|
|
DE2447429A1
|
|
Mine shield support with roofbar - roofbar forepoled off telescopic powered beam with joint on waste shield
|
|
DE2443460A1
|
|
Mine shield support system - has roofbar held parallel to floor bar at all heights by kinetic linkage
|
|
DE2431740A1
|
|
Mine shield support with roofbar control - control rod, mounting guide, shield and floor bar parallelogram linkage
|
