|
US7085104B1
|
|
Low profile head gimbal assembly with shock limiting and load/unload capability
|
|
US6969989B1
|
|
Method for characterizing a perpendicular recording head writing pole
|
|
US7474508B1
|
|
Head gimbal assembly with air bearing slider crown having reduced temperature sensitivity
|
|
US7041985B1
|
|
Manipulator for microscopy sample preparation and methods for making and use thereof
|
|
US6944938B1
|
|
Method of forming a magnetoresistive device
|
|
US7131346B1
|
|
Spin stand testing system with fine positioner for head stack assembly
|
|
US7124654B1
|
|
Method for determining a microactuator range of movement
|
|
US7027242B1
|
|
Method and apparatus for measuring write-induced pole tip protrusion
|
|
US7170725B1
|
|
Magnetic sensor having an aluminum-nitride seed layer for an anti-ferromagnetic layer
|
|
US7238292B1
|
|
Method of fabricating a write element with a reduced yoke length
|
|
US7092195B1
|
|
Method of using a magnetic write head having an internal heater
|
|
US7199975B1
|
|
Magnetic head for perpendicular recording with hard bias structure for write pole tip
|
|
US7193815B1
|
|
Shielded pole magnetic head for perpendicular recording
|
|
US6934113B1
|
|
Method and system for providing dynamic actuation of a write head using a strain element
|
|
US7248449B1
|
|
Magnetoresistive read sensor with reduced effective shield-to-shield spacing
|
|
US7212384B1
|
|
Magnetic read head with recessed hard bias and current leads
|
|
US7248433B1
|
|
Magnetic head with stitched top pole layer and single layer coil or solenoidal coil
|
|
US7199974B1
|
|
Read/write head with reduced pole tip protrusion
|
|
US7239478B1
|
|
Write element for perpendicular recording in a data storage system
|
|
US6809899B1
|
|
Magnetic heads for perpendicular recording with trapezoidal pole tips
|
