Timber plank for building walls for wooden houses, has rectangular cross-section with width and height, where two grooves and two plugs are formed on side surfaces of width in each case
DE102009032091A1
Swimming pool, has pump provided in plant room and comprises protective cover at humidity-endangered section, and switch that is provided for automatic interruption of current to pump which is accessible and usable as tool shed
DE102009032090A1
Swimming pool, has cover provided in splash-water protected pump housing for closing pump housing, and protective switch that is provided such that electrical pump is connected in powerless manner during opening of cover
DE102008062721A1
Connection construction for wooden swimming pool, has angles bent corresponding to angle of side walls and broader than groove and spring, where angles are as thick as spring and two laterally abutting planks are connected with each angle
DE102008062720A1
Connection construction for wooden swimming pool, has inner plate bent corresponding to angle of side walls, and outer plate connected with inner plate by bars, where side walls are arranged on base plate by horizontal planks
DE102008062722A1
Connection construction for wooden swimming pool, has edge plate with angular portion of preset range at perpendicularly running edges, where portion engages in groove of each side wall, and edge plate is fastened to side walls by screws
DE102008062719A1
Connection construction for wooden swimming pool, has side walls with abutting edges, which are held together with edge plate from outside, where edge plate is fastened to side walls using screws, and construction is lined with foil
DE102008062718A1
Connection construction for wooden-swimming pool, has edge plate including outwardly aligned bending at perpendicularly running edges, where edge plate is connected to side walls by continuously tensioning screw
DE102008059238A1
Presentation device for sauna- or infrared thermal cabins, has vertical plate, and wall sections forming right angle with front and back sides of plate, where image is arranged on front side and back side of plate
DE102006041258A1
Carport i.e. roofing for vehicle, has flat roof with perpendicular supports, and wall made from boards, where size and form of wall and dimensions of boards are selected such that boards are mounted in different arrangements
DE102006033080B3
Sauna cabinet has rectangular base and cover and sidewalls with doors at the angle between two sidewalls that open outwards and with edges that lie together in the closed condition
DE102006022217A1
Carport for use as canopy for vehicle e.g. passenger car, has two angle brackets provided at upper end section of front supports and including angle of specific range, and rear supports replaced by extension
DE102005042064A1
Home sauna construction, has seating bench so designed that non-used volume below seating bench is flow-technically separated from volume within casing, by partition wall, so that no air mixture occurs in both volumes
