Two=part packing for upright vessels - has belt parallel to side-walls closing ends and joining top flaps
DE2910575A1
Plastics bottle for repeated use - with two ring zones of greater dia. for wear protection
DE2910609A1
Parison for repeated use bottle - designed with specified cross=section and diameter to length ratio
DE2907507A1
Carrier for canned food or drink - has rigid frame between can pairs with grooved recesses for can rims and resilient strap around outside
DE2834418A1
Stackable and erectable box construction - has two double hollow sidewalls with inside sections glued to lugs in base
DE2829486A1
Voluminous machine cardboard for packaging moist or greasy food - contains heat-curable additive to control stiffness, absorptivity and strength
DE2820298A1
Single sheet forming stackable box - has stacking edges with locking lugs at ends hooking into slots formed along certain fold lines
DE2818483A1
Cardboard package for flat cartons - consists of three sectional unit with two end sections and wrap round section
DE2817969A1
Packaging container e.g. cardboard box with tear-open device - has oblique or wavy scores on which there is adhesive plastics tape for ripping open
DE2816563A1
Packing carton made from single sheet - has corner members folded into straight prismatic shape at wall ends
DE2810407A1
Double piston liq. spray head - has spring loaded excess pressure preventing valve mounted on stepped end of discharge valve
DE2807949A1
Transparent polyester returnable bottle for carbonated drinks - produced by multistep, biaxially drawing and blow-moulding a sectionally heated parison
DE2801728A1
FOLDING BOTTOM BOX
DE2739544A1
Cardboard box with reinforced gripping holes in ends - has tear strip just above holes with starting lug on outside at one corner
DE2738745A1
Stackable and erectable cardboard box - is made from single blank with flap connections on longitudinal edges of sloping side walls
DE2728879A1
One-piece cup tray - has insert halves with edge strips lying flat against each other with teeth
DE2718133A1
Packing base for bottles lying flat - is of single sheet folded to form double layer walls
DE2716955A1
Box-section cardboard cup tray - has supports for perforated plates formed by surfaces stamped out of holes
DE2655538A1
Bottle carton formed by foldable blank - has top and bottom end flaps formed by folding over and gluing tabs
DE2655496A1
Single strip cardboard package for bottles - has four panels forming top, base and sides, with attached flaps forming ends of package