|
US10945320B1
|
|
Output voltage control method to avoid LED turn-on flash
|
|
US2020381173A1
|
|
Common mode inductor with dual leakage paths
|
|
US10945322B1
|
|
Lighting circuit and method for negative feedback control recovery in overload conditions
|
|
US10952299B1
|
|
Power control method during input line voltage fluctuation
|
|
US10709024B1
|
|
Low-cost SMT printed circuit board connector
|
|
US10794576B1
|
|
Slide adjustable hinge and latch securement for a light emitting diode (LED) fixture retrofit kit
|
|
US10707763B1
|
|
Partially clamped resonant half-bridge converter for highly efficient constant power LED driver with inherent hard-switching protection
|
|
US10622887B1
|
|
Adaptive off time control to improve total harmonic distortion and power factor for critical mode flyback type PFC circuits
|
|
US10707746B1
|
|
Power converter with independent multiplier input for PFC circuit
|
|
US10581321B1
|
|
Flyback converter with multiplier signal control circuit and method
|
|
US10554122B1
|
|
Low loss voltage feedback method for power factor correction circuits
|
|
US10560993B1
|
|
Dimming controller for LED driver and method of indirect power estimation
|
|
US10553339B1
|
|
Common-mode choke with integrated RF inductor winding
|
|
US10512143B1
|
|
Method for commissioning lighting system components using voice commands
|
|
US10588205B1
|
|
Isolated digital control device for LED driver using NFC technology
|
|
US10595383B1
|
|
Device and method for programming or configuring of NFC equipped LED driver
|
|
US10624163B1
|
|
Lighting device with output buffer circuit for stability during no-load or standby operation
|
|
US10483864B1
|
|
Method for detecting short circuit conditions in frequency control loop components
|
|
US10476399B1
|
|
Frequency control method for self-oscillating circuit
|
|
US10788191B1
|
|
Power track and method of mounting and connecting a light modulator to supported luminaires
|
