|
DE3238879A1
|
|
Roof edge covering
|
|
DE3146659A1
|
|
"DEVICE FOR TRANSMITTING HEATING ENERGY"
|
|
ATA374781A
|
|
Studs, especially for locking a frame profile to a frame OD. DGL.
|
|
DE3113489A1
|
|
Roof-border cladding
|
|
DE3112760A1
|
|
Window or door element
|
|
DE3035024A1
|
|
S=shaped roller shutter guide rail - has chambers to hold sealing or cladding profiles in shutter edge guide chambers
|
|
DE3023250A1
|
|
NOISE AND VISUAL PROTECTION WALL
|
|
DE3022192A1
|
|
Window frame profile corner joint piece - has shank side recess for adhesive meeting externally accessible profile hole
|
|
DE3017200A1
|
|
Thermally isolated window or door frame section - has intermediate air gap forming thermal break
|
|
DE3015140A1
|
|
Window or door frame section aligning stabiliser - has cross-arms engaging cut=outs in end of groove held angled shanks
|
|
DE3013079A1
|
|
Door or window sill weatherproof rail - has elastic sealant in linked, externally accessible grooves in end caps
|
|
FR2479888A1
|
|
Sliding door or window frame - consists of four E-section channels each of which houses runners and seals
|
|
DE3010476A1
|
|
DEVICE FOR RECORDING OR DELIVERING HEATING ENERGY
|
|
DE3001402A1
|
|
Composite heat insulated window or door profile - has continuous lengthways cut=outs at corners of chambers holding connecting layers
|
|
DE2930539A1
|
|
Waterproof slotted window or door frame - has sealing on pane or panel support protecting rebate bottom
|
|
DE2930538A1
|
|
Connector for ridge joint roof cladding sections - adjusts pitch using lozenge shape spacer plate with double cantilever straps head and foot
|
|
DE2927131A1
|
|
Window frame bar and frame profile connector - has turning clamps insertable in shank and bar grooves
|
|
DE2924386A1
|
|
Window or door mitre cut frame - has corner joints with shank grooves engaged by clamped profile interior lugs
|
|
DE2921913A1
|
|
Serrated corner piece joining sealing profiles - has teeth higher than shanks cross section surface, and protruding
|
|
DE2905580A1
|
|
Mitre jointed frame profiles stabilising and aligning unit - consists of angle stiffener with shanks pressed into inside grooves
|
