Device for retrofitting intermediate rafter insulation
DE102010052120A1
Mobile solar power plant i.e. variable sculpture, for gardens and parks in private and public space for power generation, has tape collector consisting of permanent elastic intermediate layer that is connected with elastic solar collector
DE102004055337A1
Illumination device e.g. electric light bulb, for e.g. garden, has light source with LEDs including contacting agent, where LEDs and agent are fused in plastic disk, and device reflects and/or refracts sunlight
DE102004004432A1
Spotlight for external use based on compact, energy saving, long service life LED technique, consisting of integral plastics or natural glass housing with peripheral rabbet on inner wall for fitting LED mounting board peripherally sealed
DE10336543A1
Solar power system
DE10253611A1
Hanging lamp has preferably conducting frame with pairs of sleeves or openings at defined angle to plane of frame that accommodate elastic rods, strips or tubes under tension so as to form curves
DE10239983A1
Decorative metal or plastics fencing, is assembled from modular fence elements allowing incorporation of LED light sources
DE10203424A1
Light emitting diode light for illuminating plants, objects has light stem arranged in center of light cap, LEDs grouped around center to radiate light parallel to light stem from above to below
DE10143789A1
Floor lighting for path-marking or decorative effect, encapsulates circuit board for light emitting diodes in transparent plastic
DE10137472A1
Source stone and spring light for lighting up emerging water has a light made watertight with clear resin, shaped as a ring and fitted with diodes in different colors and designs.
DE10038587A1
Fence with fence elements attached to fence posts by means of fittings
DE10027039A1
Freely laid floor element has two-level construction and based on flexurally rigid, very compact and moisture-insensitive support plate connected to wear surface by elastic adhesive, forming tread sound damping layer
DE10009441A1
Cross-grained parquet floor blocks are triangular and parted at angle to give angled edges for blocks glued together by adhesive forming resilient acoustic layer between blocks and underfloor.
DE19922080A1
pole holders
DE19906663A1
Fence and screen assembly has a two-part holding bar for the fence panels where the upper part shrouds the screws holding the lower part to the fencing for protection against weather
DE19860319A1
Multifunction skirting board
DE19849400A1
Fastening fitting for fence elements on fence posts