Air supply arrangement for a housing wall of a housing and housing with an air supply arrangement
DE102008004321B3
Heat exchanger for use in housing i.e. switching cabinet, has nozzles via which partial air stream is directed, where partial air stream has flow rate higher than that of air flow directed in longitudinal direction of flow channel
DE102007017916B3
Door hinge arrangement for closing e.g. housing opening, has bolts pointing in direction of housing, and unlockable spring prestressed locking device effective at bolts and retaining bolts in withdrawn position
DE102007012980A1
Door arrangement for closing a housing opening
DE102006043071A1
Protective cover for electrical installation units
DE102004013318A1
Cooling system, for a switchbox with a fan and filter, has an electric setting unit for flaps and slides to control part warm air flows to overlay the cold air to give two operating modes
DE102004013317B3
Filter fan for cooling a control box comprises a fan and a filter cassette arranged in a housing which is built into an opening of a control box wall
DE10352023A1
Air conditioning device
DE10231850A1
Clamping device for mounting a shielded cable
DE10210658C1
Switchgear housing air-conditioning unit installation using reception opening of defined width and height provided in door or side panel of switchgear housing
DE10205653C1
Switchgear air-conditioning unit installation device has angle frame and sealing element used for adapting outer contour of air-conditioning unit to rectangular seating in housing door or side panel
DE10202058C1
Switch cabinet has opening door supported by hinge axis held between hinge lugs projecting beyond front vertical ends of sidewalls
DE10202059A1
Post sorting cupboard has vertical sections with insertion areas that stretch from the roof which can be adjusted
DE10161805C1
Attachment arrangement for electrical cabinet with noise protection wall has bearer arrangement coupled to connection units in two separate vertical bearer profiles anchored in floor
DE10113924C1
Mounting for fixing to switch cabinet frame has fixing plate with central fixing bore and complementary coupling projections and coupling recesses perpendicular to bore axis
DE10113935C1
Control cabinet with frame and cladding elements
DE10113936C1
Electrical cabinet with frame chassis and cladding elements has at least inside surfaces of angled edges of vertical cladding elements at 45 degrees to inside surfaces of cladding elements
DE10113888C1
Control cabinet with frame, cladding and base
DE10113923C1
Switchgear cabinet has cladding panels provided with lipped edges received in free space provided by frame component
