Spindle motor with casing for hard disk drive, has separate, pot-shaped casing closed on one side with stator fitted to outer periphery and outer rings of roller bearing fitted to inner periphery
US6445535B1
Disk drive with spindle motor and electrical connection arrangement
DE10026467A1
Spindle motor for hard disc drives, has plate packet or entire stator at least partly molded with plastic centering casing that is directly centered on fixed shaft
DE10022408A1
Hard disc drive with spindle bearing system, has space between axially separate roller bearing assemblies sealed against axial air throughflow by at least one sealing arrangement
US6628477B1
Spindle motor with temperature compensation
DE10014825A1
Spindle motor has carrier film with soldering land to which one end of connection pin passing through hole in base disk, is soldered
DE10005232A1
Spindle motor for hard drives with a reduced stator
DE19954962A1
Spindle motor for driving hard disk drives with sealing contact for the stator winding connection
DE19950463A1
Method for producing a hydrodynamic plain bearing for a spindle motor and a hydrodynamic plain bearing produced using the method
DE19934775A1
Electrically commutated electric motor, has rotor whose permanent magnet(s) form single magnet or it is formed of individual segments; north and south poles butt against each other
DE19918468A1
Spindle motor with labyrinth seal and sleeve for tension-free mounting of the bearings
DE19918461A1
Spindle motor for hard disk storage with a small overall height
