Pipe fixing system for fixing underfloor heating pipes to insulation foam
DE102017001233A1
Underfloor heating pipe fastening system in which a plastic needle is stapled with a setting device via the pipe in the underlying insulation
DE102016008683A1
Laying rail for the distance-accurate fixing of floor heating pipes on a foam layer
DE102016004832A1
Cover and insulation system for pipes or cables of a floor heating and their supply lines
DE102010008578A1
Measuring point for flooring underlay and heated screeds on cement or anhydride base as mark point and for measuring material thickness, has cutting range, which is arranged between fixing area and inscription range
DE102006022467A1
Tacker needle magazine for tubes and cables comprises single clips with no inner barb or holding region
DE102005011485A1
Mounting system for central heating- or hot and cold water pipes comprise strip with raised section which has bores, into which bases of pipe clips fit which are in form of split rings with release lug at top
DE102005011226A1
System for fixing pipes in floor heating unit uses flat profile with markings to fix pipe independently of insulation through special tacks at required spacing
DE10332718A1
Clip for underfloor heating pipes comprises curved central section and pointed legs which are connected to it by horizontal sections with transverse grooves, allowing clip to flex and fit over pipes of different diameters
DE10329481A1
Ground anchor for fixing cables and pipes in differing grounds has pipe holder section of plastic with multiple function flap at one end, and anchoring section of metal for length adjustment
DE10311468A1
Brass distribution system for subdividing gases or liquids has plastic depth stop in transition from primary tube to connectors
DE10133000A1
Attachment system for pipes, cables to wires, rods, especially for pipes of hot water floor heating system to grid mats, has pipe holder clips consisting of center part engaging pipe, side arms
DE19944827A1
Combined pipe and cable system for individual room regulated heating or cooling system, has pipes for conducting heat carrying medium and electric cable for thermostatic control
DE19933340A1
Tack system for fixing pipes and cables on hard wooden or similar supports uses fastening clip with metal insert directed straight down without twisting through setting tool having vertical guides and spring-tensioned ram rod
DE19927859A1
Former for shaping and installing pipe bends comprises two half-molds hinged together at one end and held with a clip at the other end
DE19904236A1
Flush-mounted distribution cabinet for heating and plumbing systems consists of separate rear section for flush mounting and front section with frame and door with site tolerance compensation
DE19861052A1
Tacker for pushing floor heating holders into lower insulation layer, with pushrod, punch and punch guide in form of single plastic component
DE19829608A1
Tip anchor tacking needle system for fixing floor heating pipes on concealed insulation layer
DE19818151A1
Insulation and installation system for fittings in sanitary and heating pipe structures
DE19757489A1
Clip for fixing underfloor heating-pipes to perforated flat rail,
