|
PL412772A1
|
|
Method for shaping the characteristics of a device powering the steering system of motor vehicles
|
|
PL409903A1
|
|
Method for removal of ammonia nitrogen from water solutions, and in particular from liquid wastes
|
|
PL408470A1
|
|
Method for detection of protozoa from Cryptosporidium and Giardia genera
|
|
PL406699A1
|
|
Method i device for dynamic production of warm iron pressed materials with increased density
|
|
PL406697A1
|
|
Method i device for dynamic production of anisotropic hard magnetic materials with the crosswise direction of easy magnetization
|
|
PL406692A1
|
|
Automated method and the device for dynamic producing of thin-walled elements from crushed materials
|
|
PL406640A1
|
|
Energy-saving system for charge transport in the press-furnace assembly
|
|
PL406641A1
|
|
Transport pallets for the tunnel pusher furnace
|
|
PL406642A1
|
|
System for recuperation of energy and separation of vapours in the sealed backward flow tunnel kiln
|
|
PL406541A1
|
|
System of protections for the ultraenergy pulsatory-rotating mill
|
|
PL406540A1
|
|
Drive for the ultraenergy pulsatory-rotating mill
|
|
PL403304A1
|
|
Reciprocal orthosis mechatronically assisted
|
|
PL403274A1
|
|
Method for reducing particulate emissions in the exhaust gas of diesel engine
|
|
PL403273A1
|
|
Method for ignition homogeneous lean fuel-air mixture in the cylinder of an internal combustion engine
|
|
PL401975A1
|
|
Miniature diaphragm heat exchanger
|
|
PL400741A1
|
|
Method for treating a suspension of pig manure
|
|
PL400514A1
|
|
Homing a wind turbine arrangement with a horizontal axis to the rotation wind direction
|
|
PL399862A1
|
|
The method for modifying the epoxy resin with epoxy compounds obtained from poly(ethylene terephthalate), in particular residual
|
|
PL399861A1
|
|
Method for preparing epoxy resins from poly (ethylene terephthalate), in particular residual
|
|
PL399681A1
|
|
Method for for preparing polyfunctional polyether polyols of the carbazole ring
|
