Novel shelving system for home and offices, comprises rectangular base element and square base element and simple shelves, where shelf units are assembled for normal-sized books as well as large volumes of illustrated books
DE102011018195A1
Shelf structure for bookshelf used in e.g. living room, has base element whose short side is exploited along one shelf edge for leaning books and in which square element with rear wall is mounted
DE102010013556A1
Writing and working area, particularly mini-office for residential areas, has shape of cube in folded position, where upper plate comprises six equal quadratic surfaces
DE102008046177A1
Racking system for book shelves in living and reading areas, has L-shaped base element designed with seven single sides, where small bevel is milled-off at every outer edge of sides
DE102008030301A1
Bookshelf for use in e.g. wall system at residential area, has compartment mounted on left shelf side, and another compartment mounted on right shelf side in displaced manner, where compartments are arranged with book distance
DE102008012745A1
Tool for creating and modifying stoma bag for use by older people, has retaining strap hanging downwardly to collar to resemble part of left and right sides of strap next to head, so that clothing part is adhered to retainer clip
DE102004055145A1
Folding table which can be enlarged has rotating plates which by swivel movement cause raising of lifting plate to form desktop whereby plates are separated by hair joint
DE102004019573A1
Table has top made up of two leaves, one of which slides to left and other to right, additional leaves of same size being fitted into spaces created
DE10357644A1
Table, comprising four legs attached to tabletop with new design of holding units
DE10320048A1
Table has top made up of six separate panels, two outer panels being glued to base board, while inner four can slide sideways to give different configurations
DE10310969A1
Shelving or tables for home or office furniture is composed of identical base sections pushed together to give an intersecting structure with locking intersections and T-profiles in a variety of configurations
DE10214874A1
Corner cupboard for use in entrance halls and cloakrooms has only two walls and is mounted on pivots at top and bottom, allowing it to be turned so that open sides face walls when cupboard is not in use
DE10031052A1
Rectangular or square table; has foot formed as rectangular metal tube cut off at table top and welded to form mitre joint, with horizontal extension fixed to support edge of table top
DE10025477A1
Wardrobe either wall mounted or free standing has coat hangers with ball instead of hooks
DE10020487A1
Stackable coffee table is made up of two symmetrical sections forming table top in two parts linked by sloping leg panels with interlocking slots across half their width, so that they can be assembled into X-shape
DE10020154A1
Wall-mounted clothes rack has base panel with metal tube attached to upper edge carrying swivelling end sections linked by bars to clothes rail which normally hangs against the wall but can be pulled out until it rests against end of rack
DE10019281A1
Coat rack comprises vertical pole which stands in corner of room and stretches from floor to ceiling, horizontal bar hanging on wire from hook at top of pole and being supported against walls on either side
DE19934026A1
Doorknob for room doors has the handle offset from the rosette by a holder and lever arm to give a gap between them for open access from the right and left sides
DE19930948A1
Room door; has door jamb with doubling on outer surface projecting over front edge of door jamb and form fold, where further doubling projects over front edge of doubling to cover hinge plate
DE19912412A1
Work or interview table; has two superimposed base plates, where top plate can be placed on top of bottom plate, leaving narrow storage space, or rotated to form round table with no storage space
