|
JPS55110214A
|
|
Method and device for coupling lightt conductive pass with electriccligth conversion element
|
|
DE2656920A1
|
|
Contact element for multipole connectors - is stamped from sheet crimped to leads, and retained in housing by projecting tongues
|
|
DE2644612A1
|
|
U=shaped spring contact - has spring contact arms at end and two small inward-facing tags as stops for ratchet retaining flap
|
|
DE2632338A1
|
|
Lock for multipole electric socket units - has enlarged longitudinal holes for housing retaining pins provided with open slots
|
|
DE2628167A1
|
|
Contact bracket shaped from stamping - has latching prong and free section along longitudinal side acting as stop
|
|
DE2507904A1
|
|
Multiway distributor socket and terminal unit - has separate skirt element in insulating housing for shrouding live parts
|
|
DE2419257A1
|
|
Winch with solenoid locking mechanism - has catch forming part of magnetic circuit and yoke joined to baseplate
|
|
DE2350775A1
|
|
Wire-wrap-post stabilisation for multiple connectors - has hollow gudgeon pins on fixing plates around posts
|
|
DE2330839A1
|
|
Simply constructed armature bearings - by injecting a plastic into a groove in the armature as guide ring in the bearing region
|
|
DE2226061A1
|
|
ELECTROMAGNET
|
|
DE2220997A1
|
|
MULTIPOLE ELECTRICAL CONNECTOR WITH CONTACT ELEMENTS FOR CRIMP OR LOET CONNECTION
|
|
DE2146565A1
|
|
MULTIPOLE ELECTRIC CONNECTOR
|
|
DE1926313A1
|
|
Electromagnetic diaphragm pump
|
|
DE1925434A1
|
|
Magazine for automatic record changer
|
|
DE1904423A1
|
|
Electromagnet with positively held yoke angles
|
|
DE1803577A1
|
|
Electrical circular connector with lockable housing halves
|
|
DE1765256A1
|
|
Snap lock for the housing of electrical connectors
|
|
DE1640411A1
|
|
Connector for fastening in mounting wall cutouts
|
|
DE1572447A1
|
|
Tonearm control for optional record side playback for automatic record changer
|
|
DE1640392A1
|
|
Connector strip, especially for printed circuit boards
|
