Process for producing a thin-walled, tubular fiber-plastic composite (FKV) with an inner coating of thermoplastic
DE102018002206A1
Method for producing a split tube
DE102017003061A1
connecting element
DE102017003024A1
End element for introducing force into a prefabricated fiber-reinforced plastic composite pipe
DE102016013431A1
Impact-indicating coating for fiber composites
DE102016011721A1
Process for producing thin-walled coatings on tubular fiber composite materials
DE102016010590A1
canned
DE102016007663A1
Tubular fiber composite body with integrated stepless length adjustment
DE102014000134A1
Force application assembly
DE102013018970B3
Fiber composite pipe
DE102012012930A1
Monitoring layer for e.g. guiding train-pressing rod, is applied on basic layers such that basic layers are recognized by visual inspection and in region at spacing starting from mark outer diameter measured from end of application element
DE102012001538A1
Method for providing tensions in composite base bodies of circular saw blades, involves pre-tensioning metallic portion of circular saw blade during manufacture and adding mechanical and/or hydraulic unit in radial direction
DE10304044A1
Resin infusion process for production of fiber composite roll tubes involves use of flow tubes to increase resin distribution rate through fiber reinforcement
DE10246868A1
Pressure vessel consists of a fibre reinforced thermoplastic pipe, a lid with inner and outer sections, and safety rings
DE10242513A1
Preform sheet, is formed by mixing spirally shaped fibres with a binder and then activating the binder before removal from the mould
DE10035545A1
Connecting system for multilayer plastic pipes comprises locking sleeve fitted over intermediate sleeve, ends of this cooperating with contours of outer layers of pipe and sealing sleeve being fitted into grooves at end of each pipe
DE10028246A1
Plastic coating for curved surfaces under dynamic load, e.g. roller surfaces, comprises thermoplastic matrix with reinforcing fibres oriented mainly in the direction of the thickness of the coating
DE10000705A1
Pressure container for storing liquid and / or gaseous media under pressure consisting of a plastic core container which is reinforced with fiber-reinforced plastics and process for its production
DE19953815A1
Fiber laminate material production comprises using a winding technique, with finishing stations on a movable base member