Internal round and flat grinding process for workpiece involves bringing outer surface of truncated-cone front part into engagement with inner surface of boring
DE102004052342A1
Undulated work piece sharpening method, involves synchronously engaging sharpening and support units at surface of workpiece and setting sharpening and support units in direction orthogonal to longitudinal axis of workpiece
DE102004042090A1
machine tool
DE102004038005B3
Machine tool for machining operations has carrier for spindle stock between two guides
DE102004035360A1
Flexible transfer machine
DE102004012385B3
Machine tool for machining corrugated workpieces comprises tool supports arranged on the lower side of a horizontally moving carriages of each carriage arrangement
DE10348801B3
Spindle device for radially adjustable rotating tool has main spindle connected to tool receiver via rotating lock
DE10325421A1
machine tool
DE10322428B3
Process for monitoring a beam guiding system of a laser beam processing installation comprises moving a measuring part through a relative movement opposite the processing head in place of a workpiece at the processing site
DE10257533A1
Machining center with several processing devices
DE10257610B3
Retention device for machine tool spindle arranged between stationary bearing for spindle and workpiece or tool chuck
DE10252707A1
Tool turret and machine tool
DE10249473A1
machine tool
DE10243394A1
Process for processing workpieces in machine tools comprises holding a workpiece on a transport device using a workpiece spindle, processing the workpiece
DE10227336A1
Tool wear monitoring involves detecting contact between tool and workpiece in second processing step, evaluation contact detection to determine actual dimension achieved in first processing step
DE10224532A1
support pallet
DE10224347A1
Machine tool with swiveling workpiece spindle
DE10213755A1
Processing machine for multi-axis movement of a tool or workpiece
DE10207636A1
Measuring system for use with machine tool has probes touching cylindrical surfaces ground by angled grinding wheel to monitor changes in diameter as grinding continues