LV5598A3
|
|
Metals meniscus level adjustment pan for crystallizer preform continuous vertical lean process
|
FR2646172A1
|
|
Al-li-cu-mg alloy with good cold deformability and good damage resistance
|
EP0289432A1
|
|
Process for forming at the surface of an aluminium alloy a zone rich in aluminium of at least one of the elements nickel, iron, cobalt
|
FR2626009A2
|
|
Al alloy product containing li corrosion resistant under tension
|
FR2624137A1
|
|
Aluminum alloy parts, such as connecting rods, with improved fatigue resistance and method of manufacture
|
FR2623526A1
|
|
Process of continuous anodization of aluminum strips or one of its alloys to be coated with an organic product
|
FR2621839A1
|
|
Method for controlling and adjusting the lubrication of the working face of rotary cylinders of a continuous belt casting machine
|
FR2617423A1
|
|
Method of joining aluminium or aluminium-alloy components by solid-state diffusion
|
FR2617189A1
|
|
Aluminum alloy sheets containing magnesium suitable for stamping and stretching box bodies and process for obtaining same
|
FR2617188A1
|
|
Al-based alloy for casing and process for obtaining
|
FR2616691A1
|
|
Process for producing metal tubes or cases, device for implementing same and products thus obtained
|
FR2616363A1
|
|
Method and device for molding sand into light alloy matrix composites and fibrous insert
|
FR2615530A1
|
|
Aluminum alloy for thin sheet suitable for obtaining lids and box bodies and process for producing the same
|
FR2614901A1
|
|
Aluminum alloys for brazed heat exchanger
|
JPS62254989A
|
|
Connection of aluminum or aluminum alloy member by solid state diffusion
|
NZ223557A
|
|
Vertical casting of metal: split mould used to allow inductive control of metal height
|
FR2612201A1
|
|
Process for the heat treatment of li-containing al alloys with a view to preserving their surface health
|
FR2610949A1
|
|
Method for desensitizing corded under tension of li-containing al alloys
|
EP0232211A1
|
|
Process for treatment of aluminium surfaces which are intended to be coated with a fluorcarbon film
|
FR2609656A1
|
|
Method of adjusting the contact line of the free metal surface with the lingotiere in a vertical cast of products of any section
|