Bolt and plug unit has cylindrical pin lying against shell in region of boring-side end over entire jacket length
DE10060361A1
Plug for use in cement, masonry or light materials, especially cracked material, has thread with horizontal top and bottom section which forms acute angle with it
DE10053310A1
Safety screw has neck, washer with cavities into which fit lugs
DE10048523A1
Wall plug has circular nut fitted in central bore which tapers towards inside of plug, top sections of plug, which are separated by longitudinal slits, fitting against this and being spread as nut is screwed in to fasten plug in place
DE10043425A1
Dowel-driver has drill and holder-bolt
DE10034121A1
Wall plug has external thread, top section of thread being at right angles to central axis of plug, while lower section is at angle to it
DE10027543A1
Screw holding device for electric screwdriver can be automatically turned away during screwing in
DE10019522A1
Screw lock especially for anchor screws for attachment in hard components such as concrete or stone comprises spring washer with slot which has width measurement slightly smaller than diameter of washer
DE10011996A1
Dowel setting tool for machine setting of dowels integrated in tube clamps; has setting tool tube clamp that is constrained and guided in two perpendicular axes during setting process
DE10008789A1
Dowel driver tool for dowels integrated in pipe clamps, is guided within the clamp and has depth defining stop and protective hand grip
DE19955266A1
Plug fastener for use in hard and soft materials has its sleeve prolonged on one side of flat central shaft, acting as guide to ensure that plug is fitted centrally in bore
