Device for introducing additional gas flows into the intake port of a mixture-compressing internal combustion engine
DE3138328A1
Improvement of the mixture formation for internal combustion engines
DE2927858A1
Two-stage IC engine carburettor - has first stage of larger cross=section to provide weaker mixture
DE2908088A1
Combined IC engine-steam motor - has heated cooling water pumped into exhaust-heated heat exchanger to generate steam for driving steam motor
DE2843600A1
Fuel preparation system in carburettor - passes mixt. through condensate trap in front of mixing chamber
DE2843601A1
IC engine fuel metering system - has control pressure supplied by adjustable spring acting on plunger
DE2751984A1
Tension relief device for seat belt with automatic retractor - consists of spring-loaded clip attached to webbing underneath strap deflecting fitting
DE2751993A1
IC engine providing squish combustion space - has inclined deflector surfaces on piston and cylinder head to define narrow ignition gap
DE2645076A1
DEVICE FOR PRODUCING A FUEL-AIR MIXTURE FOR SUPPLYING INTERNAL COMBUSTION ENGINES
DE2624116A1
Air intake for multi:cylinder engines - has separate mixing chambers for inner and outer cylinders to compensate for different pipe lengths
DE2624050A1
IC engine with divided compression spaces - has rotating gas flow produced by two opposite located compression zones
DE2619275A1
Combustion improvement system for IC engines - in which combustion chamber has deflector to produce two turbulence counterflows
DE2611775A1
Combustion engine with angular oscillating piston - has combustion space shaped so that turbulence is induced in gases just before ignition takes place
DE2542620A1
Fuel injection system for IC engines - has two nozzles in series proportioned to give sonic velocities
DE2514416A1
Internal combustion engine with stratified fuel air supply - first part of a normal induction charge is weakened by an auxiliary air feed
DE2504308A1
IC engine exhaust recycling system - contains water bath to clean exhaust gases before return to suction
DE2502876A1
Fuel suction unit for carburettor engines - uses slots in the suction channel, to determine combustion air speed
DE2449047A1
Control of accelerator-pump of carburettors - by delaying-devices placed between gas-lever, accelerator-pump and throttle-valve
DE2439971A1
Vehicle fuel flow meter - produces digital output by counting passage of small turbine blades past pick-off head
DE2434862A1
Stratified charge carburation with divided combustion chamber - with minimum emissions of CO, CH and nitrogen oxide
