EP1640297A1
|
|
Loading bridge support with sensor
|
EP1464599A2
|
|
Loading ramp with height conforming bearing section
|
EP1013870A2
|
|
Arrangement at a loading and unloading exit sealing
|
DE19959227A1
|
|
Building with a crossing bridge
|
DE19916365A1
|
|
Gate for buildings
|
DE19814566A1
|
|
Goods loading ramp retained in both upright and lowered positions by coil springs inside telescopic tubes
|
DE19751623C1
|
|
Overlay bridge for ramp
|
EP0780536A1
|
|
Gate
|
EP0761579A1
|
|
Building with a loading station
|
EP0758710A2
|
|
Device for the weather proof bridging of the gap between the rear of a vehicle and the border of a wall opening
|
DE19607274A1
|
|
Dock leveler for ramps
|
GB9511341D0
|
|
Assembly arrangement for bridge plates of bridging devices
|
DE4405757A1
|
|
Buildings with a dock leveler and a lockable building opening
|
DE4330360A1
|
|
Switching device for loading devices
|
EP0583673A1
|
|
Loading bridge for ramps
|
DE4243297C1
|
|
Seal between doorway and vehicle rear - has hooked metal component securing sheet and with leaf spring fitting round cross-beam
|
DE4242746A1
|
|
Support plate for bridges and ramps
|
DE4242415C1
|
|
Loading-ramp bridge with lorry-wheel chock - is prevented from swinging into working position by switch on chock if this is not in place
|
DE4242088A1
|
|
Deformable seal of the gap between the edge of a building opening and the rear of a vehicle approaching it
|
DE4242087A1
|
|
Deformable seal of the gap between the edge of a building opening and the rear of a vehicle approaching it
|