Sliding door arrangement for closing opening in body of e.g. personal vehicle, has coupling units causing movement of connecting part based on position with rigid connection of part to carriage or glider and direction of movement of leaf
DE10253472A1
Airbag Module for a vehicle which is rotatably mounted in the armrest of the seat so that the opening direction of the airbag can be changed
DE10117938A1
Inner trim section and especially dashboard of vehicle has unit to accommodate folded airbag with flat center section covered by single layer airbag fabric and on inner side is connected to airbag cover
DE10117396A1
Device for moving front bonnet of motor vehicle to raised position has second lever arm fixed to body and linked to first arm to fold relative to first arm in scissors action when first arm raised
DE10106653A1
Method for processing information in a control device for a safety system for motor vehicles
DE10056598A1
security system
DE10055828A1
Hinge device and safety device for a motor vehicle
DE10050168C1
Roof module, for motor vehicles, consists of outer thin-walled roof skin, internal lining, and two internal hollow bodies for stiffening purposes and to supply air into vehicle interior
DE10043290C1
Arrangement for protecting vehicle occupants during impacts has actuator(s), bearer element(s) movable approximately perpendicular to impact direction, cushioning element(s)
DE10037051A1
Car with bonnet (hood) acting as safety device has bonnet pivoted at bumper height and closing mechanism in rear region of bumper
DE10036992A1
Safety system for a motor vehicle
DE10023651A1
In an interior trim part for motor vehicles integrated airbag system
DE10018893A1
Instrument panel for a motor vehicle and method for producing a plastic carrier for an instrument panel
DE10018186A1
Vehicle door and method for its manufacture
DE10014510A1
Body part of a motor vehicle
DE10013563A1
Vehicle safety system for protecting pedestrians has reversible safety device activated by first activated sensor near front fender; subsequently operated sensor is near leading edge of hood
DE10006330A1
Car airbag cover has rigid base, outer skin and layer of foam between these, lines of weakness running from recess in base through foam layer almost to surface of outer skin which are formed by two layers of skin in contact