Connector or dowel used for connecting of elements in medium-voltage switchgear systems has on inside a plastic injected component which is sheathed in cast resin
DE102004058171A1
Method and module for the anticipatory start-up of steam turbines
DE102004054180A1
Heat exchanger for a transformer
DE102004027470A1
Switch-gear module e.g. for HV switching stations, uses end region of conductor elements to grip through connecting flanges
DE102004021978A1
Method and device for switching off a fault current occurring in an AC mains
DE102004016602A1
Voltage/current-measurement system for measuring current on a switching installation has a conductor and a transformer linked to evaluatory electronics
DE102004016197A1
Winding for a transformer or coil and method of manufacture
DE102004006609A1
Vacuum switch with shielding
DE102004002173A1
Method for testing a circuit breaker
DE10360633A1
Medium-voltage switchgear
DE10354594A1
Drive unit of a switching device of a gas-insulated switchgear and modular system for forming a drive unit
DE10354592B3
Induction drive for a disconnector and / or earthing switch
DE10354595A1
Spindle drive for a disconnector and / or earthing switch
DE10302209A1
Gas-insulated switchgear
DE10260353A1
Tool set with a position sensor attached to it
DE10252435A1
Oven-hardening of coils rotated to prevent resin from dripping-off, passes direct current through coil conductors to cause heating
DE10128842A1
Isolator for gas-isolated cable, has bearer elements with curved or trapezoidal transverse profiles, low thickness relative to distance between current conductor and inner casing surface